XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
factory needle settings? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3714 |
Page 1 of 1 |
Author: | JohnB [ Sat Jun 03, 2006 01:56:05 ] |
Post subject: | factory needle settings? |
hey guys - I'm looking for the factory needle settings on the Max Power M5. Mine has been giving me some headaches lately and I'm going through everything to eliminate any problems. Thanks! |
Author: | Joao Pina [ Sat Jun 03, 2006 03:29:06 ] |
Post subject: | |
Try this one http://www.jpracing.com/en/products/fx- ... _fx21b.php The carburator is the same |
Author: | mario [ Sun Jun 04, 2006 14:54:29 ] |
Post subject: | |
The best is always to contact the manufacturer directly at info@rcmaxpower.com |
Author: | Rocco Margiotta [ Wed Jun 07, 2006 17:11:51 ] |
Post subject: | |
In the Xtreme RC Cars magazine when they did a review on the M5, they have the needles set at 1 turn in from flush on the top and 2 turns in from flush on the bottom. No matter what you do, just CONSTANTLY check the temp if you change your needles. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |