XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Novarossi Plus 21-5? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3647 |
Page 1 of 3 |
Author: | Richmond [ Tue May 23, 2006 05:46:13 ] |
Post subject: | Novarossi Plus 21-5? |
I've been breaking it in and so far I just have 24 tanks through it so I don't really know what else to expect from it. So far it's showing alot of torque similar or maybe even better than the P5. Does anyone have experience with this motor? |
Author: | Richmond [ Sun May 28, 2006 04:39:12 ] |
Post subject: | |
Eeep . . guess not. Anyone? Anyone? Beuler? Beuler? ![]() |
Author: | Rich [ Sun May 28, 2006 06:58:17 ] |
Post subject: | 21-plus 5 |
Author: | Grayalf [ Sun May 28, 2006 14:30:08 ] |
Post subject: | |
Author: | imaxx21 [ Sun May 28, 2006 22:41:51 ] |
Post subject: | |
Author: | Richmond [ Mon May 29, 2006 06:59:50 ] |
Post subject: | |
Author: | Richmond [ Tue May 30, 2006 00:29:08 ] |
Post subject: | |
Author: | imaxx21 [ Tue May 30, 2006 01:33:37 ] |
Post subject: | |
Author: | Rich [ Tue May 30, 2006 04:53:56 ] |
Post subject: | 21 plus 5 |
Author: | harder [ Tue May 30, 2006 11:56:52 ] |
Post subject: | |
Author: | Richmond [ Tue May 30, 2006 14:17:38 ] |
Post subject: | |
Author: | harder [ Tue May 30, 2006 15:00:20 ] |
Post subject: | |
Author: | Richmond [ Tue Jun 06, 2006 03:21:49 ] |
Post subject: | |
I decided to switch from the JP-2 to the Novarossi 9886 with the short header and I am overly pleased with the results. With more than a gallon run through it I can defenitely see the top end speed of the S421BX and a little more bottom end than the P5X. This defenitely is the next gen P5! ![]() |
Author: | Brixen [ Thu Jun 08, 2006 20:04:11 ] |
Post subject: | |
I also consider this engine, but I've heard someone said something about the bearings breaking. I dont believe this very much though, as it is a novarossi. |
Author: | Richmond [ Thu Jun 08, 2006 21:21:06 ] |
Post subject: | |
i'm on my 1 1/2 gallon and so far so good. you won't be dissapointed. |
Author: | TQ Zen [ Sat Jun 10, 2006 22:38:35 ] |
Post subject: | |
Author: | imaxx21 [ Mon Jun 12, 2006 00:13:04 ] |
Post subject: | |
Author: | ajoiner490 [ Tue Jun 13, 2006 17:33:41 ] |
Post subject: | |
Seen 4 people have trouble with these locally. Anyone else having problems with either the +21-5 or the Hot Mods version? The ones I've seen give people trouble are the Hot Mods, not much life out of them. |
Author: | Richmond [ Tue Jun 13, 2006 18:34:18 ] |
Post subject: | |
Just as long as you get it to 200 degrees it should be fine. I found that the RB#6 plug was the best one for it. Since the pinch is sooO tight, it defenitely takes more than a gallon for the Hott Mod to run without problems. It likes to run slightly rich on the bottom and two turn in on the top. I'm running a 9886 pipe. Hope this helps. |
Author: | ajoiner490 [ Tue Jun 13, 2006 19:14:52 ] |
Post subject: | |
I don't run them, just was curious as to if it was a known thing or just these guys having trouble. I'll let them know Rich, thanks! |
Page 1 of 3 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |