| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8TQ Setup? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3631 |
Page 1 of 1 |
| Author: | Rocky [ Fri May 19, 2006 17:02:52 ] |
| Post subject: | XB8TQ Setup? |
I was woundering if anyone has a good setup for the xb8tq, for a ruff dry track, supercross style. I just bought the buggy and am about to build it. I have a personal track that I practice on and its getting ruff. I just need some help with a good setup thanks . |
|
| Author: | eenascar [ Fri May 19, 2006 17:21:14 ] |
| Post subject: | |
if ya talk to adam he could probly help. there so many different set. i personally use 5,7,1. for better control but adam and frosty hang it out there. you can also go to set up sheet on this site and find different set ups |
|
| Author: | Rocco Margiotta [ Fri May 19, 2006 17:45:14 ] |
| Post subject: | |
I would probably go with 1.5 pistons all the way around with 700wt in the front and 500wt in the back. 2,5,7 in the diffs or maybe 2,5,5 (f,c,r) with the mugen greys. Run the rear arms as flat as possible with 0's front and rear of the front arm holders. Front shocks, 3rd hole in top row of tower and middle on the arm. Rear shocks, 3rd hole in bottom row of tower and outside on arm. 2.2mm sway bar in front and 2.4mm sway bar in rear with 3 degrees of toe with the plastic hubs. This the setup I generally run that change a little from track to track... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|