I would probably go with 1.5 pistons all the way around with 700wt in the front and 500wt in the back. 2,5,7 in the diffs or maybe 2,5,5 (f,c,r) with the mugen greys. Run the rear arms as flat as possible with 0's front and rear of the front arm holders.
Front shocks, 3rd hole in top row of tower and middle on the arm.
Rear shocks, 3rd hole in bottom row of tower and outside on arm.
2.2mm sway bar in front and 2.4mm sway bar in rear with 3 degrees of toe with the plastic hubs.
This the setup I generally run that change a little from track to track...
|