If i order the TQ arms, and put them on my original XB8, can i do the same adjustments. Do the arms come with the spacers??
Or is this unique to the TQ version only??
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8TQ Wheelbase shim position? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3467 |
Page 1 of 1 |
| Author: | nitroracer [ Fri Apr 21, 2006 18:32:35 ] |
| Post subject: | XB8TQ Wheelbase shim position? |
| Author: | Rocco Margiotta [ Fri Apr 21, 2006 19:48:03 ] |
| Post subject: | |
This is what I was referring to in the front toe section, or trying to, haha! But with the TQ suspension, it allows for the adjustment of the arms front to rear with a 2mm caster clip. You have the wheelbase adjustment in the rear hubs (like the original car, as well as the adjustment of the wheelbase in the arms). If you look very closely, you can see the open ends of the caster clip in the right, rear arm and see how the arm is spaced a little in front of the rear-rear suspension holder... |
|
| Author: | LudaChris [ Fri Apr 21, 2006 19:55:34 ] |
| Post subject: | |
If i order the TQ arms, and put them on my original XB8, can i do the same adjustments. Do the arms come with the spacers?? Or is this unique to the TQ version only??
|
|
| Author: | nitroracer [ Sat Apr 22, 2006 01:48:38 ] |
| Post subject: | |
Ok Rocco then is there something wrong with my car or did they make a late improvement to the TQ because mine came with a 1 mm, 2mm, and 3mm wheelbase clip in that area. If I only use the 2mm clip, there seems to be space left over for a 1mm clip. And of course, I wouldn't be able to use the 3mm clip unless there was enough space for it. |
|
| Author: | Rocco Margiotta [ Sat Apr 22, 2006 21:40:20 ] |
| Post subject: | |
| Author: | guy02 [ Sun Apr 23, 2006 20:41:14 ] |
| Post subject: | |
| Author: | LudaChris [ Mon Apr 24, 2006 12:28:53 ] |
| Post subject: | |
Thanks Rocco. I think it's time for me to get the TQ!!!!!
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|