| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| xb8 tq rear set up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3376 |
Page 1 of 1 |
| Author: | muddybuggy [ Tue Apr 04, 2006 22:23:59 ] |
| Post subject: | xb8 tq rear set up |
| Author: | ajoiner490 [ Tue Apr 04, 2006 23:01:45 ] |
| Post subject: | |
I run the TQ rear tower, but not the rear kick pieces with the extended hingepins. By putting the clips in FRONT of the arms, the length of the car will increase. This will take a bit of steering away but make the car more stable in rough sections. I *think* the arm position is the same as stock if you run the clips behind the arms. -Adam |
|
| Author: | mario [ Sun Apr 09, 2006 23:14:17 ] |
| Post subject: | |
The best to start with is to follow the basic set-up sheet included in the kit. There are two basic set-ups, one for US tracks and one for EU tracks. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|