Mine does the same thing, slim, on both of my XB8's. I find it a minor problem as it's better than any other 1/8 I've owned.
Annoying, though...
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| leaking diff https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2914 |
Page 1 of 2 |
| Author: | slim [ Mon Jan 23, 2006 17:46:48 ] |
| Post subject: | leaking diff |
| Author: | JohnB [ Mon Jan 23, 2006 18:37:44 ] |
| Post subject: | |
hey slim - Maybe your diff. case is just worn out around the outdrive hole? Thats pretty strange - i can't believe its still leaking after packing grease! |
|
| Author: | imaxx21 [ Mon Jan 23, 2006 23:51:36 ] |
| Post subject: | |
| Author: | slim [ Tue Jan 24, 2006 00:10:27 ] |
| Post subject: | |
| Author: | SuperXRAY [ Tue Jan 24, 2006 08:40:41 ] |
| Post subject: | |
Mine does the same thing, slim, on both of my XB8's. I find it a minor problem as it's better than any other 1/8 I've owned. Annoying, though...
|
|
| Author: | slim [ Tue Jan 24, 2006 16:12:24 ] |
| Post subject: | |
| Author: | JohnB [ Wed Jan 25, 2006 18:22:44 ] |
| Post subject: | |
| Author: | NateB8 [ Wed Jan 25, 2006 20:36:55 ] |
| Post subject: | |
| Author: | slim [ Wed Jan 25, 2006 22:17:34 ] |
| Post subject: | |
| Author: | NateB8 [ Thu Jan 26, 2006 07:12:12 ] |
| Post subject: | |
| Author: | slim [ Thu Jan 26, 2006 07:30:47 ] |
| Post subject: | |
yea. shoot me a email to slimxb8@gmail.com im gonna tear into it thursday night and ill mic/check it for slop. |
|
| Author: | David Joor [ Fri Jan 27, 2006 03:45:09 ] |
| Post subject: | |
| Author: | slim [ Fri Jan 27, 2006 03:52:08 ] |
| Post subject: | |
| Author: | David Joor [ Fri Jan 27, 2006 06:45:38 ] |
| Post subject: | |
| Author: | slim [ Fri Jan 27, 2006 17:03:23 ] |
| Post subject: | |
| Author: | ajoiner490 [ Fri Jan 27, 2006 17:12:38 ] |
| Post subject: | |
| Author: | SuperXRAY [ Sat Jan 28, 2006 05:38:39 ] |
| Post subject: | |
| Author: | SuperXRAY [ Sat Jan 28, 2006 05:43:01 ] |
| Post subject: | |
| Author: | slim [ Sat Jan 28, 2006 15:25:27 ] |
| Post subject: | |
| Author: | SuperXRAY [ Sat Jan 28, 2006 18:53:40 ] |
| Post subject: | |
I think it comes out from the case/ring gear mounting area. I've noticed that the ring gear can actually get quite warm, both from friction and being in contact with the clutch. I don't really know as I haven't investigated it, but that's my guess. Maybe, IF that's the problem, XRAY could come up with a groove/o-oring type seal instead of the fiber gaskets. Just a thought.... |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|