XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Shock pistons XB8E https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=28161 |
Page 1 of 1 |
Author: | dreja [ Fri Aug 23, 2019 09:33:17 ] |
Post subject: | Shock pistons XB8E |
Hello, I've a got an issue with shock pistons - I observed very strange behaviuor. The shocks were moving very hard, sometimes even stopping so I decided to rebuilt them. First I disassembled one front and one rear shock - the pistons were very hard to be pushed out. The oil inside was very dirty. I cleaned both the shocks and the pistons. After that I tried to move the piston up and down (with all the o-rings out) and it was still very hard to move, almost blocked. I left everything disassembled through the night, and the next day the problem was gone - the pison moved without problems. I disassembled the other two shocks and the behaviour was the same. Through the night the issue dissapered. I measured the diameter of the piston before and after "resting". I can confirm, that all the pistons became narrower after "resting" through the night. The difference is less than 0.1mm, but enough to create problems. Is this normal ? Do pistons expand, when they are soaked in oil ? Thanks Andrej |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |