| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| o-ring seals in differentials.... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2764 |
Page 1 of 1 |
| Author: | JohnB [ Sun Dec 25, 2005 21:55:46 ] |
| Post subject: | o-ring seals in differentials.... |
hey guys - Well I must have been good this year because i received an XB8 for christmas. I've been on these forums several times and have had plans for an XB8 for quite some time - so it was quite a surprise to see one for Christmas! I've been in the hobby for about 5 years and racing 1/8th scale for quite awhile so I am far from a newbie. This looks like a great forum! Anyway, now to my question. I noticed alot of you have not been installing the o-ring seals in the differential and just wanted to know why not? Thanks! |
|
| Author: | nolec5 [ Sun Dec 25, 2005 23:40:01 ] |
| Post subject: | |
Congrats on an awesome gift and welcome to the XB8 family! I think the main reason people don't use the o-rings in the diff spider gears is for consistency. The o-rings can have a tendancy to wear out and change the feel of the diff over time. It is just as easy to get the same feel by using thicker diff fluids instead of the o-rings. I've used them in the past when in a bind, when I didn't have say 10,000 diff fluid on hand but in general, I don't use them either. I think they also have a tendancy to make the diffs fell a little to "thick". You've probalby noticed that a lot of people like running lighter diff fluids in the XB8, such as 5/5/5 or 5/5/3. The o-rings would just make it harder to get to this softer feel. Good luck with the new car! I know you'll love it. |
|
| Author: | mhjs15 [ Mon Dec 26, 2005 00:44:54 ] |
| Post subject: | |
| Author: | desdad [ Mon Dec 26, 2005 06:57:42 ] |
| Post subject: | |
| Author: | ajoiner490 [ Wed Dec 28, 2005 03:15:50 ] |
| Post subject: | |
| Author: | JohnB [ Wed Dec 28, 2005 07:10:58 ] |
| Post subject: | |
| Author: | Chris Crews [ Thu Dec 29, 2005 06:31:31 ] |
| Post subject: | |
| Author: | Chris Crews [ Thu Dec 29, 2005 06:32:05 ] |
| Post subject: | |
| Author: | dani [ Thu Dec 29, 2005 17:40:08 ] |
| Post subject: | |
| Author: | JohnB [ Thu Dec 29, 2005 21:17:51 ] |
| Post subject: | |
| Author: | guy02 [ Thu Dec 29, 2005 23:37:42 ] |
| Post subject: | |
| Author: | dani [ Sat Dec 31, 2005 13:49:42 ] |
| Post subject: | |
thanks for the info guys! the xb8r does not come with rubber o-rings for the spider gears. cheers! dani |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|