XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
droop screws https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=27275 |
Page 1 of 1 |
Author: | fox947 [ Thu May 24, 2018 20:19:33 ] |
Post subject: | droop screws |
Hi, I have a new XT8 truggy and would like to set the droop screws to the numbers in the basic setup page. I have the 30mm setup blocks and the ride height guage o to -13 hudy. The rear seems to be no problem , but the front when assembled has such a kickup(angle) that the ride height guage isn`t high enough. It calls for -10 in rear and -7 in front. The setup blocks are in the right spot. What am I doing wrong. I checked on the site and they are the right setup pieces for a truggy/buggy. Hope some one can help. Thanks ![]() |
Author: | Pierce [ Thu Dec 27, 2018 20:19:23 ] |
Post subject: | Re: droop screws |
Author: | malli [ Wed Jul 31, 2019 07:12:53 ] |
Post subject: | Re: droop screws |
Author: | samkroes [ Tue Aug 06, 2019 10:27:42 ] |
Post subject: | Re: droop screws |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |