| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| screw head messed up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=27272 |
Page 1 of 1 |
| Author: | ichy [ Sat May 12, 2018 18:46:33 ] |
| Post subject: | screw head messed up |
Hello , I was mounting the front differential and the screw head was damaged. no way to get it back  ... do I have to drill 2 mm? and try to remove it with an extractor …File comment: head screw compress.jpg [ 27.17 KiB | Viewed 1581 times ] Do you have any advice to give me for the extractor to use? and do you make a set of screws? |
|
| Author: | ichy [ Sat May 12, 2018 23:35:19 ] |
| Post subject: | Re: screw head messed up |
hello guys, i've just use a dremel to use flat head screwdriver but now , i 've to buy some more screw 
|
|
| Author: | clarkie_ni [ Thu Jun 14, 2018 14:31:15 ] |
| Post subject: | Re: screw head messed up |
replace these with m3 cap head screws. the 2.5mm head ensures no stripping. infact i dont know why xray dont change these as standard, the M3 buttons heads in this area are awful for stripping |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|