| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Crowdpleazer 2.0 for MBX5 spotted https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=237 |
Page 1 of 1 |
| Author: | herber [ Sun Oct 10, 2004 21:37:44 ] |
| Post subject: | Crowdpleazer 2.0 for MBX5 spotted |
| Author: | nitrojim [ Mon Oct 11, 2004 04:43:34 ] |
| Post subject: | |
I have my buddies 777 in my garage and his body fits perfect on the xb8. |
|
| Author: | Giorgi50 [ Mon Feb 14, 2005 19:08:14 ] |
| Post subject: | |
| Author: | atm92484 [ Mon Feb 14, 2005 23:19:12 ] |
| Post subject: | |
Aside from what giorgi said with the front body mount, I had a small problem finding exactly where my antenna was going to come out of the box and exactly how high to cut the body on the lower edges. |
|
| Author: | Giorgi50 [ Tue Feb 15, 2005 03:33:09 ] |
| Post subject: | |
To help find the antenna hole. take your regular xb8 body and put it over your 2.0 body and line up the rear mounting holes. Then just take a marker and mark out the exsisting hole you had for your antenna on you first body, and for the botton of the body you can cut out right on the line it will be a perfict fit besides trimming around the steering plate. |
|
| Author: | Troy Weatherholt [ Tue Feb 15, 2005 05:25:11 ] |
| Post subject: | |
Derek's newest XB8 on the left in this picture has a CP 2.0 on it and it fits nice other than having to drill the front post as mentioned above. |
|
| Author: | FreakOfNature [ Tue Feb 15, 2005 06:27:47 ] |
| Post subject: | |
I've got a CP2.0 on mine as well. I just bent the end of the clip that goes in upwards so that it points up a bit when going in. Slides over the hump nicely. It IS a pain though. |
|
| Author: | BuLLdoGG [ Wed Feb 16, 2005 17:48:06 ] |
| Post subject: | |
| Author: | Giorgi50 [ Wed Feb 16, 2005 19:45:06 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|