| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New parts look good. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2216 |
Page 1 of 1 |
| Author: | Team Helotes [ Wed Sep 07, 2005 20:06:53 ] |
| Post subject: | New parts look good. |
Check out the front page the new XB8 Parts look good. I wonder in the car kit will start coming with the new bushings? |
|
| Author: | Giorgi50 [ Wed Sep 07, 2005 20:12:11 ] |
| Post subject: | |
Awesome !!!!! Its about time !!! |
|
| Author: | Booyah [ Thu Sep 08, 2005 11:37:16 ] |
| Post subject: | |
| Author: | speed08 [ Thu Sep 08, 2005 14:34:37 ] |
| Post subject: | |
| Author: | Team Helotes [ Thu Sep 08, 2005 16:15:54 ] |
| Post subject: | |
| Author: | speed08 [ Thu Sep 08, 2005 16:26:28 ] |
| Post subject: | |
| Author: | Lingcod [ Fri Sep 09, 2005 06:28:11 ] |
| Post subject: | |
How funny that's the same modification I made to my eccentric bushings. By the way the modification works great. I tailored mine to fit the left and right sides so I only have the mill work on 1 side. I have not had a problem since I made this change and you can reuse your old A-arms with the rounded out section. |
|
| Author: | Giorgi50 [ Fri Sep 09, 2005 06:47:46 ] |
| Post subject: | |
Its not just milled. THe front is actually twice as thick, so the milled part is flush with the screw head, and the remainder sticks out past the screw to grab. |
|
| Author: | imaxx21 [ Fri Sep 09, 2005 14:34:17 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Sep 09, 2005 14:46:26 ] |
| Post subject: | |
| Author: | Desperado [ Fri Sep 09, 2005 16:52:58 ] |
| Post subject: | |
| Author: | Richmond [ Fri Sep 09, 2005 17:39:47 ] |
| Post subject: | |
| Author: | Booyah [ Sat Sep 10, 2005 03:21:05 ] |
| Post subject: | |
| Author: | endler [ Sat Sep 10, 2005 03:39:27 ] |
| Post subject: | V2 eccentrics |
| Author: | Richmond [ Sat Sep 10, 2005 04:48:49 ] |
| Post subject: | |
| Author: | Giorgi50 [ Sat Sep 10, 2005 05:00:54 ] |
| Post subject: | |
| Author: | endler [ Tue Sep 13, 2005 00:40:32 ] |
| Post subject: | Re: V2 eccentrics |
| Author: | nitroracer [ Wed Oct 26, 2005 20:19:47 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|