XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
bearing life https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2179 |
Page 1 of 1 |
Author: | Joao Pina [ Wed Aug 31, 2005 17:07:31 ] |
Post subject: | bearing life |
Author: | guy02 [ Wed Aug 31, 2005 18:46:51 ] |
Post subject: | |
Author: | mario [ Wed Aug 31, 2005 18:48:20 ] |
Post subject: | |
Author: | Joao Pina [ Wed Aug 31, 2005 22:59:07 ] |
Post subject: | |
Author: | Jeff_OKC [ Wed Aug 31, 2005 23:51:45 ] |
Post subject: | |
Author: | Giorgi50 [ Thu Sep 01, 2005 04:13:10 ] |
Post subject: | |
Author: | Jeff_OKC [ Thu Sep 01, 2005 05:26:29 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Thu Sep 01, 2005 06:59:48 ] |
Post subject: | |
Author: | guy02 [ Wed Sep 14, 2005 11:32:42 ] |
Post subject: | |
I have a question to expand clutchbearing life woundn't it be a good idea running-in the engines first tanks idling, without the bell/shoes/bearings just the flywheel on that way more than half of the clutchbearing life could be safed or is this not so good for the engine, running it without any resistance at all ...????????????? |
Author: | Barkley Abernethy [ Fri Sep 16, 2005 23:49:43 ] |
Post subject: | |
in my opinion an engine needs a load on it while run in ....i made a roller frame ..tubular steel rolling on another bit for each wheel to sit on. start the engine run it at 1/3 throttle extreamly rich making a real 4 stroke sound......the engine is pulling a load from the wheels on the frame 5 tanks like this then 2 leaning off while driving it and then tune it ....so far any engine done like this has produced good power for what it is and as for clutch bell bearing every race we replace em and if its a 45 min main replace before it starts ( thank goodness for the newer engine mount it made life so much easier) |
Author: | zieluch [ Mon Sep 26, 2005 21:38:48 ] |
Post subject: | |
I Use special oil for bal bering in hight temperature runnertime. IN poland it costed abaut 10 euro. I give you link http://www.sklep.rcracing.pl/oscom/cata ... 9db806fc75 |
Author: | plaidfish [ Thu Sep 29, 2005 21:58:27 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |