XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Brake job https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2151 |
Page 1 of 1 |
Author: | micmo [ Thu Aug 25, 2005 04:13:42 ] |
Post subject: | Brake job |
has anyone tried the laser cut brake pads. also thinking about giving cradic disc a try. |
Author: | Giorgi50 [ Thu Aug 25, 2005 05:13:59 ] |
Post subject: | |
Author: | nolec5 [ Thu Aug 25, 2005 16:01:06 ] |
Post subject: | |
On the same topic of the Avid brake discs, I was running them in my street last night and noticed that if I was hard on the brakes for two or three passes, they started to fade very bad. I assumed this was due to heat build up. Has anyone else had this happen? I'm hoping that this will only be issolated to the street. I used them this past weekend in a 20 min. main and did notice some brake fade at about the 15 min mark. Maybe I have them setup incorrectly? |
Author: | Giorgi50 [ Thu Aug 25, 2005 16:42:19 ] |
Post subject: | |
Make sure you arent using brake pads on teh calipers. Just the Phenolic disk and the new hardened calipers. NO PADS ! were you using pads ? The the only culprit I can think of. Let me know. Mike |
Author: | nolec5 [ Thu Aug 25, 2005 17:06:53 ] |
Post subject: | |
Author: | Giorgi50 [ Thu Aug 25, 2005 19:08:19 ] |
Post subject: | |
Author: | nolec5 [ Thu Aug 25, 2005 19:15:14 ] |
Post subject: | |
Author: | Giorgi50 [ Thu Aug 25, 2005 19:49:39 ] |
Post subject: | |
Author: | micmo [ Fri Aug 26, 2005 22:27:21 ] |
Post subject: | |
Author: | Giorgi50 [ Sat Aug 27, 2005 02:51:40 ] |
Post subject: | |
Author: | micmo [ Sun Aug 28, 2005 05:50:04 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |