XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
again screw problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=2095 |
Page 1 of 1 |
Author: | Super john [ Fri Aug 12, 2005 21:50:51 ] |
Post subject: | again screw problem |
I bought a one piece engine mount for my XB8-R.But now are the scews to long.Pfffffff anyone else with the same problem of do I something wrong? |
Author: | Sami L [ Fri Aug 12, 2005 23:03:33 ] |
Post subject: | |
Cut it with dremel or take shorter screw? Those screws you are using are for the "old" enginemount? Luckily they are too long... would be harder to glue some extra on it! |
Author: | imaxx21 [ Sat Aug 13, 2005 03:27:29 ] |
Post subject: | |
Author: | Super john [ Sat Aug 13, 2005 08:38:41 ] |
Post subject: | |
Author: | grahama89 [ Sat Aug 13, 2005 09:34:09 ] |
Post subject: | |
Author: | auto2 [ Sat Aug 13, 2005 17:05:28 ] |
Post subject: | |
Author: | liquidsky [ Sat Aug 13, 2005 19:22:30 ] |
Post subject: | |
Author: | Giorgi50 [ Sun Aug 14, 2005 08:35:43 ] |
Post subject: | |
Author: | Barkley Abernethy [ Sun Aug 14, 2005 22:37:29 ] |
Post subject: | |
Author: | Casper [ Mon Aug 15, 2005 19:21:27 ] |
Post subject: | |
Author: | imaxx21 [ Mon Aug 15, 2005 21:46:54 ] |
Post subject: | |
Author: | brano [ Wed Aug 17, 2005 09:53:35 ] |
Post subject: | Re: again screw problem |
Author: | ctr_mint [ Sun Dec 11, 2005 03:04:25 ] |
Post subject: | |
just made this same mistake.... personally I think this is disgraceful! |
Author: | slim [ Sun Dec 11, 2005 06:41:19 ] |
Post subject: | |
i used the SUPPLIED screws and its fine... |
Author: | nitroracer [ Mon Dec 12, 2005 02:39:03 ] |
Post subject: | |
As brano said, the XB8 and the XB8R have different screws. So if you have the regular XB8 you will be fine but if you have the XB8R you will need to purchase the correct screws. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |