| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Setup issue XB8 '15, help please https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=19402 |
Page 1 of 1 |
| Author: | antonio76m [ Sat Sep 24, 2016 19:49:05 ] |
| Post subject: | Setup issue XB8 '15, help please |
Hi guys, I've got some issue on setting the downstop on my XB8 '15 if I follow the setup book, it says to leave shocks and anti-roll bars attached, but I cannot even get the -5 rear and -2 front, arms are not going down, checked the shock length and they are as per manual, If I remove the shocks I can get down to "the floor" but still the anti-roll bars give some asymmetric issue If I remove the anti-roll bars as well I can easily set the proper downstop, but after connecting anti-roll bars and shock one side is lower then the other. any suggestion on how to proper set the downstop please? length of shock etc? Thanks Antonio |
|
| Author: | Zerodefect [ Sun Oct 09, 2016 18:30:01 ] |
| Post subject: | Re: Setup issue XB8 '15, help please |
Something is bound up. Clean the car, loosen the pivot balls, check for shock rubbing on arm etc. etc. Bent hinge pin maybe. Clean and reset the sway bars. |
|
| Author: | antonio76m [ Sun Oct 09, 2016 19:07:16 ] |
| Post subject: | Re: Setup issue XB8 '15, help please |
| Author: | Zerodefect [ Thu Nov 10, 2016 22:41:16 ] |
| Post subject: | Re: Setup issue XB8 '15, help please |
Ah, go ahead and unscrew the shock eyelet a couple turns. I was able to replicate the exact problem. With my front shocks out on the towers, and out on the arms, I couldn't get down to -1 with one of my arms. So I loosened that shock eyelet up a turn. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|