XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xb8 2016 changing front camber? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=19342 |
Page 1 of 1 |
Author: | clarkie_ni [ Sat Jun 04, 2016 20:11:23 ] |
Post subject: | Xb8 2016 changing front camber? |
How exactly do you adjust the front camber? I assume you add or remove shims to where the pivot balls attach, but do you ever touch the lower arm? Should all the adjustment but with the top arm only? Also I assume a 1mm shim will give 1 degree of camber change? |
Author: | Robin Frischkopf [ Mon Jun 06, 2016 13:52:41 ] |
Post subject: | Re: Xb8 2016 changing front camber? |
Bottom shim is left untouched. On top I don't use shims, there should be more than enough tension in the thread to keep alignment. |
Author: | Martin Bayer [ Mon Jul 18, 2016 09:51:50 ] |
Post subject: | Re: Xb8 2016 changing front camber? |
I use always 3 degree camber so i donĀ“t need to touch anything. initial setting from kit is 3 degree. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |