XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
xb8 diff https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=19306 |
Page 1 of 1 |
Author: | d87 [ Thu Apr 14, 2016 09:39:47 ] |
Post subject: | xb8 diff |
good morning, i write from spain. This is my question. I wanted to know how much silicone is put on diff. I put 5-7-3 loaded to full capacity, and the car is very nervous and does not turn in tight turns. Is it better to fill them in half? thanks |
Author: | Robin Frischkopf [ Fri Apr 15, 2016 13:35:25 ] |
Post subject: | Re: xb8 diff |
Fill them just until the cross pins (where the small gears are on) are covered with oil. Never full! If you fill them up fully they can lock up completely and also leak. If you have an accurate scale such as the hudy diff scale you can fill them to 2.1 grams. |
Author: | Zerodefect [ Sat Apr 16, 2016 00:09:36 ] |
Post subject: | Re: xb8 diff |
Try 7 up front to calm it down off power, or 5/5/3. Try the outer front shock tower holes for more steering response. Or try a longer rear wheelbase. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |