XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB8 '15 help needed for on-road track https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=19253 |
Page 1 of 1 |
Author: | antonio76m [ Thu Feb 04, 2016 23:34:44 ] |
Post subject: | XB8 '15 help needed for on-road track |
Hi all, looking for some professional help here since Im quite new ![]() basically i've been running my XB8 on an on-road track, Freedom/Rally Cross events, I've set front and central Diff with 500K oil, shoks with 1K oil with 8holes plate, lowered the the car 10cm front and 12cm rear but still I cannot get top speed and loose a lot on time on narrow tunrs rear diff s with standard 3K oil, and roll bar are 2.6 front and 2.8 rear I was thinking of adding a 3.2 bar front and 3.0 on rear, changing the shoks plate in to the 6 hole 1,2 and maybe put like a 1500 oil and a 60K oil for rear diff. is that any good? any suggestion to get the best performance from the kit? Thanks a lot Antonio |
Author: | Martin Bayer [ Mon Feb 08, 2016 17:00:57 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Hello, this car was made for off-road so it will never be perfect on asfalt. For sure you need hard springs Hard swaybar Graphite plates for arms Front 50 000 center 50 000 rear20 000 Piston6x1,2 should help |
Author: | antonio76m [ Mon Feb 08, 2016 20:47:24 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Author: | Martin Bayer [ Wed Mar 02, 2016 10:24:05 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Hello Here is link for chart witch springs: https://www.google.cz/search?q=xray+spr ... JI-lmCM%3A There is all springs we made except 4 strip. They are harder then 3 strip. For sure 500K will be better but I donĀ“t want to write you this because some people will not understand... Then try F 500K C 500K (maybe 1 000 000) R 100K |
Author: | antonio76m [ Sun Mar 06, 2016 11:25:47 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Author: | Martin Bayer [ Mon Mar 07, 2016 18:57:25 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Good! Try shorter link on rear upright. Maybe also lower front upper arm and less caster. |
Author: | antonio76m [ Wed Mar 23, 2016 22:41:30 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Author: | antonio76m [ Sun May 29, 2016 20:14:25 ] |
Post subject: | Re: XB8 '15 help needed for on-road track |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |