Hello,
Thanks, so I will keep my setting
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| setting for servo saver xb8e 2015 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=19204 |
Page 1 of 1 |
| Author: | pointeman [ Mon Dec 14, 2015 20:19:21 ] |
| Post subject: | setting for servo saver xb8e 2015 |
Hello, I Would like to have the best setting for the servo saver of my xb8e 2015. Could you tell me the good setting please ? I have a Futaba servo BLS352. I ask you that because the defautl setting of xray on the manual is too hard ! The preload setting is about 4~5mm I try 3mm an it's better, but is it the best setting, how can I know that please ? Thanks a lot |
|
| Author: | Martin Bayer [ Sat Jan 02, 2016 12:54:13 ] |
| Post subject: | Re: setting for servo saver xb8e 2015 |
Hello Servo saver setting is from track to track different. You can you pretty tight setting on flat high grip but for bumpy you need untight. I think 3mm is good! |
|
| Author: | pointeman [ Sun Jan 10, 2016 19:27:43 ] |
| Post subject: | Re: setting for servo saver xb8e 2015 |
Hello, Thanks, so I will keep my setting
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|