XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Center diff case and bearings https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=18987 |
Page 1 of 1 |
Author: | shesha [ Mon Feb 23, 2015 02:10:49 ] |
Post subject: | Center diff case and bearings |
1- Hope Xray would consider ditching the various size bearings on the front and rear out hubs and unify them with the diff bearings as one size. 2- Please do consider having a larger capacity center diff case to hold more oil for long a-mains in hot racing environments as heat buildup is very high in the center diff. 3- Please do come out with a different rear brace option similar to the mugen or kyosho type instead of having the rear brace going to rear shock tower, have it link to the rear diff case with upper brace, such option was available at the WC in italy. 4- Battery case compartment to allow for easy removal of battery, with less screws and or mini body clip. 5- Better std springs instead of progressive springs, more testing needs to be done instead of progressive ones. |
Author: | kapa [ Fri Apr 24, 2015 10:40:41 ] |
Post subject: | Re: Center diff case and bearings |
Hallo, I also like the idea of one size, bigger bearings in the front and rear hubs, as this will decrease maintenance efforts and also helps to stock the right spare bearings. The Battery case/ Servo tray is really nice, but the compartment for the battery, should have a lid with a body clip for easy access to the battery cables for re-charing or disconnecting the battery- @shesha: You may can rename this tread to "What we wish for the XB 8 2016" ![]() KaPa |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |