| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| King Pin Plads https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=18770 |
Page 1 of 1 |
| Author: | Speedfire [ Fri Aug 15, 2014 11:52:54 ] |
| Post subject: | King Pin Plads |
Hello dear community forums, Please excuse the bad english (googel translator) I now read again and again obstruct the large number of the 6 ° Kinkpin plates on the steering. can someone explain to me what is going to change the steering behave if I Aluminum King Pin boards on the XB-8 "14 upgrade from the Series 14 ° to 6 °? And how will react by increasing lag of 27 ° to 28.5 °, the buggy? I have tried many setup operation, also the "" Easy to Drive Bayer "", but until now none worked as good as the modular setup. Driving is always on natural ground is usually dusty and a bit slippery, but the bottom usually very hard my setup: All series except for Front bar 2.6 mm Rear bar 2.4 mm Diff.Öl rear 3000 Rear Toe 4 ° He is very stable on the tail, has really sufficient steering, and is not quite sooo bite and the steering input as from the out modular. Thank you for your tips now LG Speedy |
|
| Author: | dgrobe2112 [ Wed Oct 08, 2014 20:50:01 ] |
| Post subject: | Re: King Pin Plads |
it is my understanding, going from 14, to 6, will increase steering into the corner, and decrease on exit |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|