XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
About XB8 2014 problem~~~~~Seek help~~~ https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=18739 |
Page 1 of 1 |
Author: | huafacheng [ Sun Jul 13, 2014 17:52:03 ] |
Post subject: | About XB8 2014 problem~~~~~Seek help~~~ |
HELLO,everyone. I am a Chinese xray player, recently bought a xb8 2014, appeared the following problems:After the leap,occasionally the front cvd universal drive shaft from the diff outdrive adapter off. My English is not good, so the painting schema. All my settings are the original, I have the wrong? Please help to answer,THANKS! |
Author: | brano [ Mon Jul 14, 2014 05:48:10 ] |
Post subject: | Re: About XB8 2014 problem~~~~~Seek help~~~ |
If you will build the car with the basic set-up you should have no problem. If the front downstop is set to 0 then the eccentric bushings on the suspension holders can be in the middle. If the suspension downtravel is even greater then the eccentric bushings on the suspesnion holders must be in the inner position. |
Author: | Ncosta [ Fri Aug 22, 2014 14:27:36 ] |
Post subject: | Re: About XB8 2014 problem~~~~~Seek help~~~ |
Author: | Henrik [ Fri Sep 19, 2014 09:58:16 ] |
Post subject: | Re: About XB8 2014 problem~~~~~Seek help~~~ |
Hi, you can use these outdrives instead which will let you build the car however you want: 355061 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |