I would like to ask your help/opinion. I'm totally confused now and have no more idea.
I cannot adjust the left and right rear toe-in to equal value with the same bushings L&R. I've just changed to new (soft) rear arms, new rear alu hubs and put on a new 0-2° rear plate onto the car.
There's still 0.4-0.5 degree difference, measuring on the alu Hudy Setup System. With the "0" bushings in the hubs, and the ->1 1<- bushings in the plate the rear toe-in is 0.4-0.5 degree on the left and 0.8-0.9 degree on the right.
If I put the ->.5 1<- bushing the rear toe become more or less equal, but not really good since originally I would have liked to adjust 0.5° inboard and 2° outboard toe-in. And now, I cannot get the right side lower than 2.8-2.9°.
So the question would be:
- has anybody else noticed this?
- what am I doing wrong
Should I beleive in the bushing or the setup system
