| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| diff leaks.... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=1509 |
Page 1 of 1 |
| Author: | slim [ Sat Apr 30, 2005 17:29:30 ] |
| Post subject: | diff leaks.... |
| Author: | Giorgi50 [ Sat Apr 30, 2005 17:35:03 ] |
| Post subject: | |
| Author: | z-man [ Sat Apr 30, 2005 19:15:07 ] |
| Post subject: | |
| Author: | pbfoot [ Sat Apr 30, 2005 21:44:06 ] |
| Post subject: | |
| Author: | Niklas [ Wed May 04, 2005 09:25:35 ] |
| Post subject: | |
We have had absolutely zero problems with this...!? You might want to make certain that the o-ring is seated proporly around the axle in the diff house and diff gear. That could be one area, the oring will propobly be destroid then when you push the big washer on the axle etc. How thin oil are U using? The team guys now days seem to like thicker oil (3-5000) in the rear diff but then we can get "problems" with not enough lube for the axles as the thick oil seem not to can get past the washer and/or oring (the oposite of your problems). Most team guys are using some sort of high-temp synthetic grease on the outdrive axles when assembling the diffs to make shure the axles are lubed well. We do that on all 3 diffs just to make shure they all are lubed ok. |
|
| Author: | z-man [ Wed May 04, 2005 13:23:43 ] |
| Post subject: | |
| Author: | David Joor [ Wed May 04, 2005 23:08:30 ] |
| Post subject: | |
| Author: | Giorgi50 [ Thu May 05, 2005 01:06:26 ] |
| Post subject: | |
| Author: | David Joor [ Thu May 05, 2005 03:10:36 ] |
| Post subject: | |
| Author: | Giorgi50 [ Thu May 05, 2005 04:53:46 ] |
| Post subject: | |
| Author: | David Joor [ Thu May 05, 2005 04:58:44 ] |
| Post subject: | |
| Author: | Giorgi50 [ Thu May 05, 2005 13:23:04 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|