Stainless screws *** :-) ***
They are much softer than the stock screws and strip twice as fast, or even worse you will break the hole head off the screw
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Hexcrews https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=1493 |
Page 1 of 2 |
| Author: | Robert [ Fri Apr 29, 2005 01:08:58 ] |
| Post subject: | Hexcrews |
Anyone tried the hexcrews conversion kit for the XB8? Or have previous experience with hexcrews? http://webservices.advanceware.net/hexc ... ap3w0hz53n)/product.aspx?id=86964&CatID=1253 /Robert |
|
| Author: | Giorgi50 [ Fri Apr 29, 2005 01:19:58 ] |
| Post subject: | |
Doesn't the kit already have Hexheads. I know there six sided what comes with the kit. I believe thats a hex head. It already has them. |
|
| Author: | Robert [ Fri Apr 29, 2005 01:37:05 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 02:01:58 ] |
| Post subject: | |
| Author: | SuperXRAY [ Fri Apr 29, 2005 02:07:59 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 02:16:44 ] |
| Post subject: | |
| Author: | imaxx21 [ Fri Apr 29, 2005 03:06:32 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 04:51:00 ] |
| Post subject: | |
| Author: | FreakOfNature [ Fri Apr 29, 2005 06:59:31 ] |
| Post subject: | |
| Author: | Robert [ Fri Apr 29, 2005 09:24:43 ] |
| Post subject: | |
| Author: | z-man [ Fri Apr 29, 2005 13:41:32 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 18:05:26 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 18:12:07 ] |
| Post subject: | |
| Author: | FreakOfNature [ Fri Apr 29, 2005 18:35:12 ] |
| Post subject: | |
| Author: | Giorgi50 [ Fri Apr 29, 2005 19:39:45 ] |
| Post subject: | |
| Author: | Barkley Abernethy [ Fri Apr 29, 2005 23:41:23 ] |
| Post subject: | |
| Author: | chaz [ Sat Apr 30, 2005 00:51:59 ] |
| Post subject: | |
Here's one: new site, shopping not working yet (under contruction). All stock listed is stainless. Excellent prices. |
|
| Author: | Giorgi50 [ Sat Apr 30, 2005 00:56:10 ] |
| Post subject: | |
Stainless screws *** :-) *** They are much softer than the stock screws and strip twice as fast, or even worse you will break the hole head off the screw
|
|
| Author: | chaz [ Sat Apr 30, 2005 01:07:27 ] |
| Post subject: | |
| Author: | Giorgi50 [ Sat Apr 30, 2005 04:43:23 ] |
| Post subject: | |
Its a proven fact, that most racers use alloys. It has been stated by Gene H and David Joor, that in there expeirince the stainless screws seem to strip much easier than alloy screws. You have to be careful when using treadlock on a countersunk screw, becuase usually it pushes to the top of the screw and loctites the head onto the application, instead of the the threads. Thats the reason you are stripping the countersunk schassis screws. |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|