| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Is centre diff play causing spur failure ????? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=1438 |
Page 1 of 1 |
| Author: | BaldyB [ Wed Apr 20, 2005 00:28:26 ] |
| Post subject: | Is centre diff play causing spur failure ????? |
Sorry if I seem to be moaning a lot about this car but its just that i want it spot on ! Has anyone else noticed that the centre diff moves back and forth in the mount ? Is there a reason for this or is it a tolerance problem ? The reason i ask is that this could be whats causing the spur to break because, if the diff moves back then it can make the teeth run on the inner part of the bell which is slightly proud of the bell tooth root and cause a failure. This would explain why a looser gear mesh is solving the problem when really the solution might be to shim the diff and stop the movement. What do you think ? |
|
| Author: | Chris [ Wed Apr 20, 2005 01:57:10 ] |
| Post subject: | |
| Author: | team lobo [ Wed Apr 20, 2005 02:01:19 ] |
| Post subject: | |
| Author: | mmaise [ Wed Apr 20, 2005 02:01:59 ] |
| Post subject: | |
| Author: | BaldyB [ Wed Apr 20, 2005 02:39:30 ] |
| Post subject: | |
| Author: | Lingcod [ Wed Apr 20, 2005 02:47:56 ] |
| Post subject: | |
| Author: | z-man [ Wed Apr 20, 2005 04:20:47 ] |
| Post subject: | |
| Author: | David Joor [ Wed Apr 20, 2005 04:21:54 ] |
| Post subject: | |
| Author: | imaxx21 [ Wed Apr 20, 2005 06:10:55 ] |
| Post subject: | |
| Author: | Booyah [ Wed Apr 20, 2005 08:34:25 ] |
| Post subject: | |
| Author: | imaxx21 [ Wed Apr 20, 2005 08:49:01 ] |
| Post subject: | |
| Author: | KenPro [ Wed Apr 20, 2005 16:23:17 ] |
| Post subject: | |
I already have brought up this question in januari, when I build a couple of xb8 all the cars had that play in the centre diff mounts, I shimed it from the start and mounted a t spur since day one, No failure at all, not a broken part in almost 3 gallons, so im impressed of the car, the handling are superb its just a tad loose in the rear but I hope i can fix this with a bit more testing |
|
| Author: | Booyah [ Thu Apr 21, 2005 09:15:35 ] |
| Post subject: | |
| Author: | mario [ Thu Apr 21, 2005 12:51:17 ] |
| Post subject: | |
| Author: | bart boy [ Sat Apr 30, 2005 14:23:46 ] |
| Post subject: | |
if i take off the top mount there is play of about 2mm back and forth but no signs of movement when the diff is complete (strange) , maybe the two bottom mounts splay outwards and when the top is fitted the splay out is corrected ?? maybe ? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|