| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| V2 Clutch bearing advice please? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=13602 |
Page 1 of 1 |
| Author: | RXmaniac [ Mon Jul 15, 2013 14:11:30 ] |
| Post subject: | V2 Clutch bearing advice please? |
Hi Guys, I have been playing with my XB808 2011 for about 6 months now, awesome buggy! Tough as nails! The V2 clutch bell bearings are much bigger than other buggies, so I figured they will last much longer than the smaller bearings. My buggie's bearings don't seem to last more than 5ltrs of juice. Is that the norm or am i doing something wrong? Should I do more maintanance on the clutch or bearings? Do you replace those bearing alot by default? The clutch shoes are shimmed properly and the bell's meshing is correct on the spurr gear. Not to tight and not to loose. I go through 3 sets of bearings per clutch shoe set. Will somebody please refer me to a stickey or thread, I can not find maintanance tips or reliabillity tips anywhere. Thank you for your input. |
|
| Author: | Robin Frischkopf [ Mon Jul 15, 2013 16:46:41 ] |
| Post subject: | Re: V2 Clutch bearing advice please? |
This is normal. The clutch bearing is the weakest part of any car and we all change them regularly. The bigger bearings didn't last longer because due to the size they also spun faster so lifetime was about the same as 5x10. How dusty the track is you drive on also factors in and how many jumps there are but I'd say 4-5 litres is the norm. On race days I change every day just to be sure. |
|
| Author: | RXmaniac [ Mon Jul 15, 2013 16:51:05 ] |
| Post subject: | Re: V2 Clutch bearing advice please? |
Thanx Robin |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|