XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Glue on Graphite edges https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=1360 |
Page 1 of 1 |
Author: | Lingcod [ Thu Apr 07, 2005 17:20:01 ] |
Post subject: | Glue on Graphite edges |
I have seen post that recommend gluing the edges of the graphite. Is this neccessary? If the graphite splits is that a warranty/replacement item? What do you guys recommend?? Thanks, |
Author: | Rich Panganiban [ Thu Apr 07, 2005 17:23:13 ] |
Post subject: | |
Lingcod, take the time to prep the graphite. Llightly sand the edges then use a Q-tip and CA glue the edges to seal them. Just some preventative maintenance. |
Author: | Giorgi50 [ Thu Apr 07, 2005 18:01:12 ] |
Post subject: | |
Totally unnecasary IMHO |
Author: | slim [ Thu Apr 07, 2005 19:03:10 ] |
Post subject: | |
yea the cf we have, you really dont need to do it.... cf cassis on the otherhand, i would. my pan car, i did that... |
Author: | z-man [ Thu Apr 07, 2005 21:00:19 ] |
Post subject: | |
i did it to a holeshot truggy kit but it was thicker and you could actually see the layers. where as the fiber is tight on the XB8 and you dont need to glue it. it of high quality and i just dont see it comming apart at all! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |