XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
808 pinion gear and bearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11934 |
Page 1 of 1 |
Author: | Alain 808 [ Thu Nov 10, 2011 22:11:25 ] |
Post subject: | 808 pinion gear and bearing |
I have an XB808e '10 and would like to change diff bearings, now it has two bearing if I add 1 bearing more and add the differential Collar is it would be better ? Or am I change whole bulk head , 8*16*5 bearings and xt8 bevel drive gear 10T like the 2011 Spec Thanks to any advise |
Author: | Max power [ Sun Nov 13, 2011 19:57:05 ] |
Post subject: | Re: 808 pinion gear and bearing |
Switching to the truggy diffs and pinions with the Kyosho drive shafts in the pre-'11 808's has proven to be a more reliable setup. I've got that setup and not only does it free up the drive train, it cuts down on maintenance. |
Author: | Alain 808 [ Mon Nov 14, 2011 04:53:22 ] | ||||
Post subject: | Re: 808 pinion gear and bearing | ||||
Thanks , but I ve got a 808E 2010 Spec not the 2010 Nitro , I change the bearings from 20mm to 16mm in a 2010 Spec Bulkhead, with xt8 pinion gear , but I couldnt find the right drive shafts Here are the pictures
|
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |