| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| alu hubs double bottom hole https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11836 |
Page 1 of 1 |
| Author: | rick oxley [ Mon Oct 10, 2011 23:38:07 ] |
| Post subject: | alu hubs double bottom hole |
just spoted these in the options parts list (part number 353358) anyone comment on why the double bottom hole? my gess new shorter rear wishbones coming as using the inner hole would surely make the track too wide??? |
|
| Author: | leebunker [ Tue Oct 11, 2011 14:53:59 ] |
| Post subject: | Re: alu hubs double bottom hole |
if you was to run the inner hole on the normal wishbone then yes the track would be to wide but but they are for running with a shorter wishbone you can drill the std wishbone to run them you need to move the hing pin hole in 6mm... i have been testing these for the last 2 months and the work really well car is more nimble and seems to be better on bumps and on landings i have run them back to back on 5 tracks dirt and astro now and been faster over a run on 4 out of the 5 and mached the times on the 5th well worth a try mate. drilling the wishbones is easy but you need to make shore you get it right i made a jig to do it and help out any uk based drivers should they what to give them a go |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|