Any suggestion?
Also I have found a collar for 3 bearings, the item 352077
Please may you help me?
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| xray808 pinion gears https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11671 |
Page 1 of 1 |
| Author: | saledan [ Fri Aug 26, 2011 10:13:54 ] |
| Post subject: | xray808 pinion gears |
Hello, I've bought two pinion gears 355111, but the seller sent me the wrong items, the 355113. Can I use the pinions 355113 with two bearings and a collar? I suppose that it could be work, but please may you confirm it? Many thanks |
|
| Author: | saledan [ Sun Aug 28, 2011 09:54:55 ] |
| Post subject: | Re: xray808 pinion gears |
Any suggestion? Also I have found a collar for 3 bearings, the item 352077 Please may you help me? |
|
| Author: | RC America [ Mon Aug 29, 2011 17:45:41 ] |
| Post subject: | Re: xray808 pinion gears |
Hi, Which version of the 808 do you have? The 3 bearing pinion gear require the use of the 13x20mm bearings since XRAY only offers the bearing spacer needed in the 20mm size. If you have a 2010 buggy with the larger bearings, you could use the 3 bearing setup after purchasing the 352077 that you mentioned. If you have the 2009 or earlier buggy, you will need to either purchase the updated bulkheads to fit the larger bearings (along with the new bearings and collars), or continue to use the 2 bearing pinion gears with the 13x19mm bearings. Hopefully that helps! Bryan |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|