XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
'10 diff filling question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11544 |
Page 1 of 1 |
Author: | Max power [ Sat Jul 09, 2011 03:34:28 ] |
Post subject: | '10 diff filling question |
The instructions do show to only fill the diffs to the pins, or halfway with fluid. I was told by an experienced racer to fill them all the way. Which way is correct? I'm about to tear my diffs down for inspection and have no fluid ready to go next weekend. Should I fill them all the way, or only half? Are there pros and cons for each way? Thanks |
Author: | Tricksy [ Sat Jul 09, 2011 09:10:45 ] |
Post subject: | Re: '10 diff filling question |
The older manuals used to say to pins the recent ones suggest top off all gears I have been doing top of gears and it has been fine Some say too full and the oil may expand and blow the seals tbh I don't belive this but either way I find top of gears is a happy medium not too full not too empty |
Author: | Mark Christopher [ Sat Jul 09, 2011 11:17:01 ] |
Post subject: | Re: '10 diff filling question |
i built mine as the 2011 sheet, and weighed all the diffs (page 2) http://www.teamxray.com/teamxray/showfi ... le_id=7454 |
Author: | Max power [ Sat Jul 09, 2011 17:47:37 ] |
Post subject: | Re: '10 diff filling question |
Thanks. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |