XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB8 EC front camber https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11515 |
Page 1 of 1 |
Author: | naptalene [ Mon Jun 20, 2011 12:54:48 ] |
Post subject: | XB8 EC front camber |
Embarrasing question.... I'm copying the euro-style setup sheet in the kit. I cant seem to get the front camber into negative values. I am using the stock hole on the c-hubs (outside one) and I've only got about 2mm of thread on the tie-rods left. I've checked the actual tie-rods and believe I'm using the correct ones, dots are facing forward etc........ I'm stumped. This isn't my first kit, so I don't think I've messed up but I can't figure it out. I'm sure it must be something stupid that I've missed. |
Author: | speed metal [ Mon Jun 20, 2011 13:18:41 ] |
Post subject: | Re: XB8 EC front camber |
Author: | naptalene [ Mon Jun 20, 2011 13:26:14 ] |
Post subject: | Re: XB8 EC front camber |
Cool, thanks. I'm happy if that's the only problem ![]() I'm used to 1:10 TC's with lots of thread left and was paranoid I was screwed up something else. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |