| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Composite bushings problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11501 |
Page 1 of 1 |
| Author: | REVOlution [ Tue Jun 14, 2011 11:18:03 ] |
| Post subject: | Composite bushings problem |
During 2-hours race yesterday I had my front lower arm holder bushing flattened 2 times. I use alu arm holders with inner plastic bushings. I do not think that their normal mileage is 1-hour race. All connections tightened, setup is good, no arms lifting. I need some help 
|
|
| Author: | REVOlution [ Tue Jun 14, 2011 11:21:32 ] |
| Post subject: | Re: Composite bushings problem |
Maybe it will be helpful... Model is XT8 2009 + Orion CRF Alpha .24. Both times it was left bushing. Most of the hard turns on our track are right. |
|
| Author: | REVOlution [ Fri Jun 17, 2011 05:40:53 ] |
| Post subject: | Re: Composite bushings problem |
Anybody here? 
|
|
| Author: | speed metal [ Fri Jun 17, 2011 07:09:17 ] |
| Post subject: | Re: Composite bushings problem |
REVOlution, Can you post some pictures? That would help a great deal! I've never had any issues with the plastic eccentric holders under normal use so I'd be interested to see what's going on. Regards, Speed Metal |
|
| Author: | REVOlution [ Fri Jun 17, 2011 12:57:25 ] |
| Post subject: | Re: Composite bushings problem |
Unfortunately I can't... didn't save them for future generations... They looked like plastic bushings  destroyed from inner axle hole. Looks like plastic was spreaded by lifting axle but axle does not lift at all... neither forward not side beat.I better speak Russian, so do not expect true English from me... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|