WOW!!
COOL CLUTCH!! where can we get those in the states!?!?!?
anyone wanna make some trades?? we have bodies and paint'em!!
or any links to where to look?
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Xray Clutch Setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=114 |
Page 1 of 7 |
| Author: | TMizzle [ Sun Sep 19, 2004 03:31:08 ] |
| Post subject: | Xray Clutch Setup |
Anyone running the clutch setup that comes with the Xray? I am still running the Mugen and the Kyosho clutch setups that were already on my motors... wondering if i should give the XRAY clutch a try... Does XRAY plan on making 1.1 springs and if not will the Mugen or Kyosho 1.1s fit on the XRAY shoes? |
|
| Author: | BuLLdoGG [ Sun Sep 19, 2004 07:05:31 ] |
| Post subject: | |
I just installed the mugen 1.1 springs on the xray clutch. I still need to try it out though. The springs are a snug fit and should work fine. They are at a slightly different angle though, so I had to raise the clutch nut a bit (1mm) with a washer so the springs would sit nicely in the notch. |
|
| Author: | imaxx21 [ Mon Sep 20, 2004 07:44:39 ] |
| Post subject: | |
| Author: | TS [ Mon Sep 20, 2004 16:27:23 ] |
| Post subject: | |
| Author: | Booyah [ Mon Sep 20, 2004 18:01:05 ] |
| Post subject: | |
| Author: | glennsrc [ Tue Sep 21, 2004 06:16:35 ] |
| Post subject: | |
| Author: | TS [ Tue Sep 21, 2004 07:35:37 ] |
| Post subject: | |
| Author: | grahama89 [ Wed Sep 22, 2004 23:56:41 ] |
| Post subject: | Clutch |
I gave up with the Xray clutch on the first day of running after it falied 3 times and now run ... ...an SPM racing clutch, I have the ceramic shoes on it and the only thing I had to do was shim it to meet the flywheel. I used the Hyper 7 style one as it sits nicer in the chassis hole. |
|
| Author: | Bob The Builder [ Thu Sep 23, 2004 14:58:56 ] |
| Post subject: | |
grahama89 How does the SPM clutch compare to a standard ( working ) three shoe clutch ? More aggressive, Less aggressive What is the wear rate like on the shoes - better, worse How much are replacement shoes ? rgds |
|
| Author: | grahama89 [ Thu Sep 23, 2004 15:35:44 ] |
| Post subject: | SPM |
There are 3 different types of shoe, teflon ,ceramic and some white stuff the same as Mugen. The bit is incredible with the ceramic shoes, You also get 3 different springs to setup the preload on the return disc. Also you can adjust the nut to set it to. Shoes are cheaper than normal 3 shoe ones (to my surprise also) and the wear rate is equal if not better than any 3 shoe I have used. In the UK we get these clutches for £30 (about US$50) and replacement shoes are £6, so IMO a bargain. |
|
| Author: | Dave_D [ Fri Sep 24, 2004 05:05:19 ] |
| Post subject: | |
| Author: | Bob The Builder [ Fri Sep 24, 2004 11:48:35 ] |
| Post subject: | |
grahama89 Where are you getting these clutches for £30. I have rung two local model shops in the UK and both have quoted £ 50. Is the Hyper 7 clutch the same diameter as the X-ray flywheel ? Do you have any part numbers for the clutch kit you used and the ceramic shoes to fit it ? Thanks |
|
| Author: | Blade1 [ Fri Sep 24, 2004 19:33:37 ] |
| Post subject: | |
WOW!!
COOL CLUTCH!! where can we get those in the states!?!?!? anyone wanna make some trades?? we have bodies and paint'em!! or any links to where to look? |
|
| Author: | BuLLdoGG [ Fri Sep 24, 2004 19:35:13 ] |
| Post subject: | |
| Author: | grahama89 [ Sat Sep 25, 2004 23:25:01 ] |
| Post subject: | |
| Author: | vgerdes [ Sun Sep 26, 2004 14:15:50 ] |
| Post subject: | |
Here is the manufacturer: http://www.spmracingparts.com |
|
| Author: | JerKap [ Sun Sep 26, 2004 14:50:44 ] |
| Post subject: | Ofna flywheel |
Can I use my Ofna Hyper 7 flywheel and clutch bell with XB8? I'm lazy and don't want to take it off my motor ,, if I don't need to.. its working great,,, but I may go back to 1.0 springs ,, using 1.1 now,,,and from what I understanding from other post, the 1.0 may work better on a loose track... |
|
| Author: | The Machine [ Sun Sep 26, 2004 18:17:54 ] |
| Post subject: | |
Measure the diameter of the Ofna flywheel. It may be to big and stick out the bottom of the chassis. |
|
| Author: | grahama89 [ Mon Sep 27, 2004 08:27:26 ] |
| Post subject: | |
| Author: | xrated [ Wed Sep 29, 2004 04:07:30 ] |
| Post subject: | |
| Page 1 of 7 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|