| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8/808 air filter housings. The same? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11287 |
Page 1 of 1 |
| Author: | TX_Punisher [ Mon Apr 04, 2011 02:22:08 ] |
| Post subject: | XB8/808 air filter housings. The same? |
I'm wanting to pick up a spare filter housing as it would be much easier to swap the entire housing with a fresh filter on my 2010. Are the filter housings for the 2008-2011 the same part number/size/design? Thanks |
|
| Author: | TX_Punisher [ Mon Apr 04, 2011 02:28:19 ] |
| Post subject: | Re: XB8/808 air filter housings. The same? |
XRA358800 That appears to be it but is that for all years XB8 and 808? Thanks |
|
| Author: | brano [ Mon Apr 04, 2011 07:28:48 ] |
| Post subject: | Re: XB8/808 air filter housings. The same? |
For your XB808 2010 you will need |
|
| Author: | TX_Punisher [ Mon Apr 04, 2011 18:20:24 ] |
| Post subject: | Re: XB8/808 air filter housings. The same? |
I see that is the low profile setup. Will both housings use the same filter element? Thanks for the link. |
|
| Author: | Adrian E [ Mon Apr 04, 2011 18:21:53 ] |
| Post subject: | Re: XB8/808 air filter housings. The same? |
No they don't - if you want to stick to 1 foam type then best bet is to fit 2 low profile housings |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|