XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
bent rear drive shaft xb808 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=11211 |
Page 1 of 1 |
Author: | f1n3sse [ Thu Mar 10, 2011 21:07:24 ] |
Post subject: | bent rear drive shaft xb808 |
Just built an xb808 09 spec and 45 minutes into the first days use came down from a jump and the rear drive shaft bent like a U. It was bent soo severe that it wouldn't even come close to clearing my motor mount. I never had this happen to any other buggy I run ever. Anyone run into this issue? Do they make a heavier duty drive shaft. I know the chassis has some nice flex but isn't that shaft supposed to flex a bit with it? |
Author: | Barkley Abernethy [ Thu Mar 10, 2011 21:37:50 ] |
Post subject: | Re: bent rear drive shaft xb808 |
It is not usual for this to happen . Was the rear brace tight ? |
Author: | Tricksy [ Thu Mar 10, 2011 23:49:14 ] |
Post subject: | Re: bent rear drive shaft xb808 |
i have done this once in 3 years driving this car and on that day i had rebuilt the car and forgot to bolt on the rear brace to the shock tower. The track had a brutal double that i hit wrong a few times and the drive shaft bent. finished the race though as usual. |
Author: | f1n3sse [ Fri Mar 11, 2011 00:42:14 ] |
Post subject: | Re: bent rear drive shaft xb808 |
Everything was tight and secure. I'm pretty meticulous with my maintenance and rebuilds. |
Author: | robin v berkel [ Tue Apr 19, 2011 22:16:02 ] |
Post subject: | Re: bent rear drive shaft xb808 |
i had that to front and rear drive shaft bent after my 808 hit full speed a tree damn tree he move to left in last sec damn i wis thy stay at sime spot al time and dont move to left and right when my car comes |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |