XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
difference in diff shims https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10730 |
Page 1 of 1 |
Author: | NitroFreak2 [ Thu Aug 05, 2010 09:38:11 ] |
Post subject: | difference in diff shims |
Hello all, I just purchased a new 08 808 and I need to do the shim in the front and rear diffs. Was wondering what the difference is in the 352076 and 352075. Any input would be helpful. Thanks Mike |
Author: | Adrian E [ Thu Aug 05, 2010 19:15:37 ] |
Post subject: | Re: difference in diff shims |
If you mean the spacer to sit between the 2 bearings to stop them moving, then those are the correct part numbers - the one you choose depends on the size of bearings you intend to run (08 and 09 spec run smaller bearings) - the 075 is the one you want for an 08/09 spec. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |