XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
1 starter box for XT8 and 808 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10729 |
Page 1 of 1 |
Author: | pickle311 [ Thu Aug 05, 2010 03:14:40 ] |
Post subject: | 1 starter box for XT8 and 808 |
What starter box are you guys using that will work on both vehicles and how did you set it up? I've got the AE starter box setup for my XT8 and have an 808 on the way. I hope I can make it work for both. |
Author: | Rocco Margiotta [ Thu Aug 05, 2010 21:30:21 ] |
Post subject: | Re: 1 starter box for XT8 and 808 |
Unless you get really creative and make some pivoting holders, the only way to use the same box for both is if you put a 'lip' of some kind in above the wheel, which will key into the chassis hole for the flywheel. (This only works on a flat-top box, which the AE box isn't.) |
Author: | pickle311 [ Thu Aug 05, 2010 23:27:44 ] |
Post subject: | Re: 1 starter box for XT8 and 808 |
Well, I guess that's a good excuse to go ahead and buy the Hudy starter box once I get the money. |
Author: | Barkley Abernethy [ Sat Aug 07, 2010 13:16:57 ] |
Post subject: | Re: 1 starter box for XT8 and 808 |
Author: | mario [ Mon Aug 23, 2010 08:52:31 ] |
Post subject: | Re: 1 starter box for XT8 and 808 |
The new HUDY off-road starter box #104400 works for both buggy and truggy. |
Author: | blade954 [ Thu Aug 26, 2010 00:57:04 ] |
Post subject: | Re: 1 starter box for XT8 and 808 |
Havent tryed the Hudy one as yet but i run the Blue OfnA box with two lids and i have knotched the lids out so its just a matter of slipping one lid on and off. Mated to a 4cell lipo and we can bump start all weekend with out fail.... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |