XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
battery's https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10501 |
Page 1 of 1 |
Author: | africa [ Mon May 24, 2010 07:00:49 ] |
Post subject: | battery's |
hi what battery must i get for my xb8 as i am running 2x ace DS 1015 servos ,i know the throttle one is an overkill . also what voltage must i look for i have a spectrum radio set up as i am looking to get a-- 4.8V 3300mAh Rx Pk Flat pack -- Or lipo but i know nothing about lipo's only heard bad things was looking at maybe getting this --RX Li-Po 2S 7.4V 5C 2600mAh thanks |
Author: | blade954 [ Mon May 24, 2010 13:19:47 ] |
Post subject: | Re: battery's |
Africa Nothing wrong with Lipos in your receiver set up properly they will out last the chassis. We have had two Nosram 2200mHa 7.4 lipo's mated to the HT 6V Reg (the one with the heat sink). And they are on there 3rd chassis all i do is put 2 extra heat shrinks around the battery and use a thin foam to help "protect" the battery further. Thing i like about the Lipo is you get a constant 6v to the servos all day not just when you turn it on like a NIMH. Yes I've seen lipos fail in the receiver box but looking at how they were set up i was amazed it dident fail sooner. |
Author: | africa [ Mon May 24, 2010 21:55:00 ] |
Post subject: | Re: battery's |
Author: | blade954 [ Tue May 25, 2010 01:30:47 ] |
Post subject: | Re: battery's |
Author: | africa [ Tue May 25, 2010 20:26:20 ] |
Post subject: | Re: battery's |
thanks will look around |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |