XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
set-up looking for a bit more https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10499 |
Page 1 of 1 |
Author: | omarwashington [ Mon May 24, 2010 02:43:19 ] |
Post subject: | set-up looking for a bit more |
looking for a bit more off-power steering during the exiting and mid of a turn. Its here were I seem to be slowing down the most, Here is my set up sheet: xform/index.php?act=view&ID=1279&setup=xb808 |
Author: | Leon McIntosh [ Mon May 24, 2010 18:38:42 ] |
Post subject: | Re: set-up looking for a bit more |
omar can you go back and fill it in all the way. I have some ideas on things you didnt fill in. |
Author: | omarwashington [ Mon May 24, 2010 21:33:41 ] |
Post subject: | Re: set-up looking for a bit more |
Author: | Leon McIntosh [ Tue May 25, 2010 16:33:13 ] |
Post subject: | Re: set-up looking for a bit more |
I would try these four things, not neccessarily in this order: - #1 inserts UP in the front suspension mounts both front and rear pieces - 12* degree caster blocks -#2 position on the rear hub -Lengthining the wheelbase at the rear hubs and maybe stiffen the car up a little bit because, imo, your car is really soft and I think that when you go back to grab throttle coming out of the corner the car probably transfers all the wieght instantly to the rear. thats all i got, hope it helps leon |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |