XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Clutchbell Freeplay https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10490 |
Page 1 of 1 |
Author: | aztecz [ Thu May 20, 2010 00:14:20 ] |
Post subject: | Clutchbell Freeplay |
Wondering what would be a good clutchbell freeplay/gap for the 808? I know it's not as critical as onroad, nevertheless. |
Author: | lauri [ Thu May 20, 2010 02:13:43 ] |
Post subject: | Re: Clutchbell Freeplay |
I like to have it around 0.7mm. This might seem a lot, but it works and haven't had a clutch failure for 2 years! I replace the clutchbell 5x10x4 bearings quite often (1-2L) and use the old ones as onroad touring car wheel bearings - nice and free spinning ![]() One sign of too little play is distorted or broken/missing adjustment shims! Another and more noticable is clutchbell bearing failure ![]() |
Author: | aztecz [ Thu May 20, 2010 12:16:28 ] |
Post subject: | Re: Clutchbell Freeplay |
WOW... Cheers lauri.. never thought it'd be that much. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |