| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Droop for XT8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10455 |
Page 1 of 1 |
| Author: | vis [ Sun May 09, 2010 11:29:46 ] |
| Post subject: | Droop for XT8 |
Good afternoon, prompt please how me to expose value droop 35, if Droop Guage Support Blocks 30 millimetres, and Chassis Droop Gauge from 0 to-13??? And why in Basic Setup Sheet there is no value Ride Height??? I feel deceived, having thrown out money for purchase of these tools, without having received possibility to adjust truggy. I ask a pardon for my bad English |
|
| Author: | Rocco Margiotta [ Thu May 13, 2010 17:43:22 ] |
| Post subject: | Re: Droop for XT8 |
I'm not really sure what you are asking as far as the numeric values of the gauges read. But, it is very hard to get a universal setting on droop as many people will read and use the gauges differently, or maybe not even use them at all. How to use the gauges and setup sheets should be somewhat of a starting point. First, you need to find a credible setup sheet with additional information in the 'Comments' section of the setup sheet (look at mine for an example). I, and some others, use the shock length to translate droop values, once you set the droop using shock lengths, you can then use the blocks (or wheels for truggies) and the droop gauge to find which values on the droop blocks equate to different shock lengths and continue tuning from there. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|