my 808 is running quite thin now i am thikning about getting a new 2010 chassis but dont want to kill the chassis so quick. Has anyone had any joy with the various skid plates that are on the mark are they any good
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Any one using the skid plates on the 808 chassis https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10397 |
Page 1 of 1 |
| Author: | Ronaldo808 [ Mon Apr 19, 2010 23:40:50 ] |
| Post subject: | Any one using the skid plates on the 808 chassis |
my 808 is running quite thin now i am thikning about getting a new 2010 chassis but dont want to kill the chassis so quick. Has anyone had any joy with the various skid plates that are on the mark are they any good
|
|
| Author: | blade954 [ Tue Apr 20, 2010 01:28:41 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
Yep we run them on the 808 and xt8 all the time and yes they do help. DE racing make a front and rear and concidering they are plastic they seam to last quiet a while. well worth the $12 bux.... |
|
| Author: | Night Thrasher [ Tue Apr 20, 2010 11:07:44 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
I'm using a DE Racing also, they last for about 2 or 3 race day before I replace them. |
|
| Author: | Adrian E [ Tue Apr 20, 2010 15:24:42 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
I didn't get on with the DE skid plates on my 808 - the front one acts like a plough in muddy conditions and fills up with mud and crud which adds a lot of weight to the front end. The rear can unbalance the car on a bumpy track, or one with big jumps, making it inconsistent on take off. Given that the rest of the chassis takes a pounding (and on the front the biggest wear area is where the chassis kick up changes) in any case I just treat the whole chassis as an annual consumable. I've run DE plates on my truggy in the past without major issues, but just didn't like what they did with the lower buggy ride heights. |
|
| Author: | NickB [ Tue Apr 20, 2010 16:44:43 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
hey ronaldo808, im using the DE set aswell I got them from JeSpares I think. There great I have gotten a year from just 1 on the back and 1 on the front! it still has prolly another months worth of racing! Some of the guys have higher wear rates depending on track surface and setup. I run on worn grass clay very bumpy. Well worth the few quid! Nick |
|
| Author: | Butcher [ Tue Apr 20, 2010 23:55:00 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
I use the DE plates & sometimes the Xtreame ali rear plate & love them. How many rocks you have in your tracks will usually determine the life of the rear plastic ones & I round the fronts with a dremel. May sound like a lot of work but I run a soft setup & the dirt gets real mean at times. |
|
| Author: | lauri [ Wed Apr 21, 2010 17:08:55 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
DE Racing plates  I run them on local races and all the trainings. For bigger races just remove them and save few gramms also.Overall they are nice and I like the DE Racing front bumper also which protects the nose better. But it is bigger and has sharp corners which might touch the ground on landings so the original is better in that matter. |
|
| Author: | low10s [ Sat Apr 24, 2010 00:40:39 ] |
| Post subject: | Re: Any one using the skid plates on the 808 chassis |
i use the alum ones in the rear all the time...last forever and do not pack with dirt like the plastic ones.. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|