XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Will an 808 clutch setup fit an XB8? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10337 |
Page 1 of 1 |
Author: | Derek1387 [ Sun Mar 28, 2010 01:48:55 ] |
Post subject: | Will an 808 clutch setup fit an XB8? |
Author: | Rampokker [ Sun Mar 28, 2010 02:33:24 ] |
Post subject: | |
I'd go for the one without the clutch bell. Which XB8 have you got? I had a XB8EC, and it used a 13 tooth clutch bell because the diff pinion and bevel gears had a different ratio to that used in the XB808. The 808 uses a 16 tooth clutch bell as stock. The 808 clutch bell also uses bigger bearings than the xb8's bell. The rest of the stuff you looked at (flywheel, collet, clutch shoes, springs, and flywheel nut) will all fit your xb8. Just remembered something else. is an excel cross reference spreadsheet showing all the part numbers for the different cars. You can see which parts will fit both the xb8 and 808. |
Author: | Derek1387 [ Sun Mar 28, 2010 02:38:17 ] |
Post subject: | |
I have an EC. SO get the one without the bell and order a seperate bell. OK! |
Author: | Rampokker [ Sun Mar 28, 2010 03:00:19 ] |
Post subject: | |
That's pretty much it. I use the ofna vented clutchbell on my cars, and really like it. It's cheaper than the xray clutch bells, which is a bonus. ![]() |
Author: | Derek1387 [ Sun Mar 28, 2010 04:42:02 ] |
Post subject: | |
Author: | Rampokker [ Sun Mar 28, 2010 05:16:44 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |