| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| I.S.S Suspension System on XT8...Problem. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10135 |
Page 1 of 1 |
| Author: | tonyv2382 [ Fri Jan 29, 2010 02:42:29 ] |
| Post subject: | I.S.S Suspension System on XT8...Problem. |
| Author: | blade954 [ Fri Jan 29, 2010 03:14:52 ] |
| Post subject: | |
| Author: | Butcher [ Fri Jan 29, 2010 07:18:12 ] |
| Post subject: | |
| Author: | Bren Ralls [ Fri Jan 29, 2010 08:49:09 ] |
| Post subject: | |
| Author: | tonyv2382 [ Sat Jan 30, 2010 06:28:18 ] |
| Post subject: | |
| Author: | Bren Ralls [ Sat Jan 30, 2010 09:04:45 ] |
| Post subject: | |
| Author: | tonyv2382 [ Sat Jan 30, 2010 19:38:15 ] |
| Post subject: | |
| Author: | tonyv2382 [ Sat Jan 30, 2010 20:11:19 ] |
| Post subject: | |
| Author: | Bren Ralls [ Sat Jan 30, 2010 21:42:50 ] |
| Post subject: | |
I guess kick up can be raised or lowered by adjusting the bushing angles from front to back. If I need it real high I can put the "1" on the rear holder to the bottom position and the "1" on the front to the upper position and vice versa...correct Bren? yes Wheelers setup had the rear position set at "0" so that is a flat angle right? yes As far as the actual degree numbers with the bushings when they are set at their maximum positions as mentioned above, what would be my kick up angle. If I know that I can figure out how it works for future reference. Have a read of page 40 on your instruction manual all angles are given or just down load the pdf, it will explain more than me listing figures. |
|
| Author: | tonyv2382 [ Sun Jan 31, 2010 19:41:42 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|