XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Feltshim for the 808 2010spec https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=10064 |
Page 1 of 1 |
Author: | walste [ Fri Jan 08, 2010 16:09:30 ] |
Post subject: | Feltshim for the 808 2010spec |
I´m sitting here building my new 808 2010 spec and gonna put the shock absorbers togheter. My quiestion now is, are there no felt shim for 2010spec? becous there is no in my kit ??? i´m talking about the number 358062. Please help me quick, i wanna get them togheter now. |
Author: | Robin Frischkopf [ Fri Jan 08, 2010 16:25:25 ] |
Post subject: | |
Please also look at the supplementary instructions sheets. The felt shims were only used in the first version of the 808. Now there are shock boots. |
Author: | walste [ Fri Jan 08, 2010 17:05:03 ] |
Post subject: | |
Yes i see that now, thanks alot! |
Author: | Slaytanic [ Fri Jan 08, 2010 18:38:23 ] |
Post subject: | |
Author: | walste [ Fri Jan 08, 2010 19:48:44 ] |
Post subject: | |
Author: | Butcher [ Sun Jan 10, 2010 00:57:16 ] |
Post subject: | |
Author: | Adrian E [ Sun Jan 10, 2010 01:55:36 ] |
Post subject: | |
Author: | Rocco Margiotta [ Mon Jan 11, 2010 17:36:50 ] |
Post subject: | |
Author: | Butcher [ Tue Jan 12, 2010 06:43:07 ] |
Post subject: | |
Felt shims on my modded 08 lower shock caps that use mugen boots keep the oil good, air free & shock body grinding contaminated free for longer than the tracks they are filled for last. I can go 1-1.5 months(usually) of racing every week in the dry & a couple play days with a bit too much water & still be very confident in my shocks. I under stand the more parts touching the shock shafts the less they will work to their highest potential but... I am slow & even if I can get back to running as much as I use to I still will not be fast enough to be limited by 10-15% more drag in my shocks. I will however be lazy enough(FORE SURE) to appreciate shocks that last more than twice as long as any(almost)of my other cars. |
Author: | B Revis [ Thu Jan 14, 2010 15:23:30 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |