| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Suggest to XRAY which XB8 / XT8 Option Parts you wish? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=600 |
Page 31 of 34 |
| Author: | daz.fx [ Sat Jun 27, 2009 22:00:47 ] |
| Post subject: | Shock spacer/shim |
The plastic seal at the bottom of the shock stops any shaft contact with the ally shock cap, very nice. |
|
| Author: | t1nm4n [ Sat Oct 31, 2009 18:02:50 ] |
| Post subject: | Re: Shock spacer/shim |
| Author: | daz.fx [ Mon Nov 02, 2009 22:40:14 ] |
| Post subject: | |
| Author: | low10s [ Thu Nov 05, 2009 06:22:48 ] |
| Post subject: | |
i like the buggy as is really..but the truck really the only thing it needs is the captured cvd's in the bearings, or either universals..and i would like to see a better looking body. |
|
| Author: | tonyv2382 [ Wed Nov 25, 2009 18:39:49 ] |
| Post subject: | XT8 |
| Author: | xlgraphicspro [ Wed Nov 25, 2009 22:03:49 ] |
| Post subject: | |
| Author: | Robin Frischkopf [ Wed Nov 25, 2009 22:19:29 ] |
| Post subject: | |
| Author: | tonyv2382 [ Fri Nov 27, 2009 17:41:12 ] |
| Post subject: | |
| Author: | Rich Panganiban [ Sat Dec 26, 2009 04:21:14 ] |
| Post subject: | |
| Author: | tonyv2382 [ Sun Dec 27, 2009 00:57:53 ] |
| Post subject: | |
| Author: | tonyv2382 [ Sun Feb 21, 2010 05:28:30 ] |
| Post subject: | |
Imagine an Xray Crawler lol...how sick wold that be.? ! |
|
| Author: | Quietman [ Sat Mar 06, 2010 12:00:19 ] |
| Post subject: | |
| Author: | Butcher [ Sun Mar 07, 2010 00:37:03 ] |
| Post subject: | |
The off road sutup book they have now pretty much explains that kind of stuff in fairly good detail. It even gives examples like turn entry or turn exit,better for rough tracks or smooth & high traction situations & low. Is there other specifics your looking for? Brens thread may help you out there or my faorite & play day at the track with time for changing setup,theres no teacher as good as experience. |
|
| Author: | Quietman [ Mon Mar 08, 2010 00:06:35 ] |
| Post subject: | |
| Author: | Quietman [ Mon Mar 22, 2010 22:36:35 ] |
| Post subject: | |
| Author: | Quietman [ Thu Mar 25, 2010 00:42:44 ] |
| Post subject: | |
Me again How about some counter sunk screws with washers to mount the engine mounts to the chassis underneath.Or some better screws harder ones as the stock ones do seem to have soft heads. |
|
| Author: | lauri [ Thu Mar 25, 2010 01:07:49 ] |
| Post subject: | |
Here you go: |
|
| Author: | Benny Burtle [ Fri Apr 16, 2010 04:32:58 ] |
| Post subject: | Re: Suggest to XRAY which XB8 / XT8 Option Parts you wish? |
I would love to see an Xray 4wd SCT.. this class is getting huge! |
|
| Author: | blade954 [ Mon Apr 19, 2010 02:31:33 ] |
| Post subject: | Re: Suggest to XRAY which XB8 / XT8 Option Parts you wish? |
I would like to see the screw holding the bottom shock in place replaced with a pin and lock nut at the other end as these always keep coming out, working there way loose. |
|
| Author: | Robin Frischkopf [ Mon Apr 19, 2010 13:05:12 ] |
| Post subject: | Re: Suggest to XRAY which XB8 / XT8 Option Parts you wish? |
They will not ever come loose if you use the counter-threaded silver screw that comes with the kit on the front right and left rear. Never! (Edit: Oops I had it wrong l/r ;-D ) |
|
| Page 31 of 34 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|